Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 8 (kliknij aby zobaczyć)
4. Put food in the oven. Note: Oven
racks, walls and door will be hot.
5. When baking is done, turn both the Oven Temperature Control and the Oven Selector to OFF During baking, the elements will turn on and off to keep the oven temperature at the setting. The Oven Signal Light will turn on and off with the elements.
The top element
helps heat
durlng
baking,
but does not turn red.
Adjusting the Oven Temperature Control
Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures. But when comparing to your old oven, the new design may give you different results. If after using the oven for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:
1. Pull the
Oven Temperature Control straight off.
Loosen the locking screws inside the control knob. Note the posltlon of the notches. To lower the temperature, move a notch closer to LO. Each notch equals aboutlO�F (5°C).
2. To mlse the temperature, move a notch closer to HI. Each notch equals aboutlO�F (5°C]. Tlghten replace the locklng the control screw and knob.
