Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
Adjusting
the Oven Temperature
Control
Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures. But when compared to your old oven, the new design may give you different results. If after using the oven for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:
LOCKING SCREWS
1. Pull the Oven Temperature Control
Knob straight off.
2. Loosen the locking screws inside the control knob. Note the position of the notches.
TOOiH
NOiCHES
TOOTH
NOTCHES
3. To lower the temperature,
move the tooth a notch closer to LO. Each notch equals about 10°F (5°C).
4. To raise the temperature,
move the tooth a notch closer to HI. Each notch equals about 10°F(5°C).
Tighten replace the locking the control screws knob. and
