Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 34 (kliknij aby zobaczyć)
Push the Start/Enter pad. The display will
go back to showing the current time of day. The Delay Indicator Light will light up and the Clean Time and Stop Time lndiitor Lights will flash to indicate that the oven is programmed to start the SelfCleaning cycle at a later time. When the start time is reached, the Delay Indicator Light will go off, the Clean Time Indicator Light will light up (stop flashing) and the oven will start to clean.
DELAY
To delay the start using Delay Start Time: Set both the Oven Selector and
Oven Temperature Control Knob to CLEAN. Push the Delay Start Time pad. The Clean Time lndiitor Light will flash and the Start Time lndiitor Light will light up. Use the Hour and Minute pads to set the desired start time. Push the �up� (A) or �down� (V) pad(s) until the correct time shows in the display.
Push the Start/Enter pad. The display will
go back to showing the current time of day. The Delay lndiitor Light will light up and the Clean Time and Start lime Indicator Lights will flash to indite that the oven is programmed to start the SelfCleaning cycle at a later time. When the start time is reached, the Delay lndiitor Light will go off, the Clean Time lndiitor Liiht will light up (stop flashing) and the oven will start to clean.
DELAY
4. After the Se&Cleaning cycle is started, the oven door will kck when the oven
temperature goes above normal baking/ roasting temperatures. The Lock Lever must not be moved and the door cannot be opened.
34
