WHIRLPOOL RF385PXYN5
Instrukcja Obsługi

4. Use the Hour and Minute pads to set the desired start time. Push the �up� (A) or �down� (V) pad(s) until the correct time shows on the display. This example shows a desired start time of 2 o�clock.

5. Push the Stop Time pad. The time of
day with the colon flashing will show on the display and STOP TIME will light up.

6. Use the Hour and Minute pads to set the desired stop time. Push the �up� (A) or �down� (V) pad(s) until the correct time shows on the display. This example shows a desired stop time of 2:30. This provides a cook time of 30 minutes (the difference between the start and stop times). NOTE: If you do not set a stop time, the colon will flash on the display and STOP and COOK will flash alternately to remind you to program a stop time or a cook time. (See page 21 for instructions on how to set delay start and stop automatically using Cook Time and Delay Start Time.) 7. Push the Start/Enter pad. DELAY, BAKE, and ON will light up on the display to show that the oven is set to start at a later time.

NOTES: l You can change the temperature or
time settings any time after pushing the Start/Enter pad by repeating just Steps 2 through 6. The display will show �door� and a tone will sound once every 5 seconds if the door is latched when you try to ba kc/roast .

l

24