Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
THE MEAL SENSOR�� TEMPERATURE PROBE
Roast or bake meats or casseroles to a set temperature instead of by time. When the Meal Sensor- Temperature Probe is properly used, the microwave oven will turn off automatically when the probe senses the temperature you set.
For casseroles, the tip of the probe should be in the center of the food. Stir foods when recommended. Replace the probe. ./--. /� ��� Plug d Cable %
For liquids, balance the probe on a wooden spoon or spatula so the tip of the probe IS in the center of the liquid
For roasts, the tip of the probe should be in the center of the largest muscle, but not touching fat or bone.
Socket
�d I
3. Make sure the probe does not touch any part of the oven Interior. Close the door.
1.
Insert at least �7 of the temperature probe Into the food.
2.
Place food in the oven and plug the probe into the sot ket on the oven wall The Probe Signal tight will come on.
4.
Set the Cook Power desired
II
5.
Move the Meal Sensor pointer to the final cooking temperature you want
6.
Push the START Button When the probe senses the cooking temperature a buzzer sounds, and the oven turns off
DO...
l l
DON�T...
let probe or probe cable touch any part of the oven interior. l let probe touch foil (if used). Foil can be kept away from probe with wooden toothpicks. Remove foil if arcing occurs. 0 use paper, plastic wrap or plastic containers. They will be in the oven too long. l use probe in regular oven. l force probe into frozen food. l use arobe for foods that need to simmer.
l
l
l
l
use hot pads when removing probe from food or food from oven unplug probe from socket to tlurn off oven light. stir foods during cookIng when recommended. stir soups. casseroles and drinks before serving cover roasts with foi, and let stand a few minutes after cooking Remove foil If you decide to cook it longer
