� You can program up to 80 buttons for the Learning function. In some cases, you may not be able to program even if you have not programmed 80 buttons. � If you select �IR SET� for a component that already has a learned button setting, the learned codes for that component are cleared. Furthermore, if the cleared learned button is used in a Macro Play setting, the setting for that button will be reset to the initial setting.
Downloading data from the receiver
The remote communicates with the receiver every time a button is pressed on the remote and displays the current operation status of the receiver on the display window. The remote can also download index names of the program sources, preset stations, CD disc names (memos)*, and information indicating the presence or absence of a CD in each slot of a CD changer* from the receiver. * Appears only when you have selected a Sony CD changer (5, 50, 200, 300, or 400 discs) connected to the receiver using the CONTROL A1 cable. Be sure to turn on the receiver and point the remote towards the receiver when performing the following procedure.
Using a command that has been learned
When selecting a learned input, press the button used to learn that function.
1
Press RM SET UP.
The set up list appears. cIR SET LEARNING DOWNLOAD INPUT LIST
2
Move the easy scroll key to select �DOWNLOAD�, then press the key to enter the selection.
The DOWNLOAD list appears. <DOWNLOAD> cINPUT SELECTOR TUNER INFO Exit
3
To download index names
Move the easy scroll key to select �INPUT SELECTOR�, then press the key to enter the selection.
To download preset stations (STR-DA5000ES only)
Move the easy scroll key to select �TUNER INFO�, then press the key to enter the selection.
