SONY RM-LP204M
Instrukcja Obsługi

qk MENU button When you have selected the VCR, DVD player, or SAT tuner, press this buton to display VCR, DVD, or SAT menu on the TV screen. Then use the cursor buttons to perform the menu operations (see �ql Cursor buttons (V/v/B/b),� �EXECUTE button,� and �EXIT/RETURN button� on this page).
Note
When you have selected VCR, the remote is set to control the VCR that corresponds with VCR 1 after you press the MENU button. Before pressing the button, make sure to set the VCR input mode to VCR 1.

w; SUB button While operating a component, press to display a list of operations that the corresponding buttons are not found on the remote. Then move the easy scroll key to select the operation, and then press the key to enter the selection. Press again to revert back to the component information. See the table on pages 10 and 11 for information on the operations that appear when you press the SUB button. wa Tape/disc operation buttons The following table shows what components are operated by each button and the function of the buttons.
Button(s) H h X x Function Starts play of the playback medium Starts play on the reverse side of the cassette Pauses play or recording or starts recording when the component is in recording standby Stops play Skips tracks Fastwinds or rewinds Searches tracks in the forward or backward direction

Location of Parts and Basic Remote Operations

ql Cursor buttons (V/v/B/b) After pressing the CURSOR MODE button or SET UP button on the receiver, use the cursor buttons to make specific settings. For details refer to the Operating Instructions supplied with your receiver. To perform menu operations on the VCR, DVD player, or SAT tuner, do the procedure below. If you do not do this, the cursor buttons merely operate the receiver. 1 Press FUNCTION and move the easy scroll key to select the VCR, DVD player, or SAT tuner. 2 Open up the cover on the remote. CURSOR TYPE list appears. If the list has disappeared before you go on to Step 3, press any of the cursor buttons to restore the list. 3 Move the easy scroll key to select the component that you selected in Step 1, then press the key to enter the selection. EXECUTE button After pressing the MENU (or SAT guide), use the cursor buttons to select a menu item, then press the EXECUTE button to enter the selection. EXIT/RETURN button Press to return to the previous menu or exit the menu while VCR, DVD, or SAT menu or SAT guide is displayed on the TV screen.

./> m/M

See the table on page 9 for information on the buttons that you can use to control each component. ws CH/PRESET/D.SKIP +/� buttons Press repeatedly to select a preset station, channel, track, or a disc.

7