6. Use the Hour and Minute pads to set the desired stop time. Push the �up� (A) or �down� (V) pad(s) until the correct time shows on the display.
This example shows a desired stop time of 2:30. The oven will automatically start cooking at 2:00 (the set stop time minus the set cook time).
7. Push the Start/Enter pad. DELAY and BAKE will light up on the display to show that the oven is programmed to start at a later time. NOTE: The display will show �door� and a tone will sound once a minute for 5 minutes if the door is latched when you try to bake/ roast. You can change the temperature or time settings any time after pushing the Start/Enter pad by repeating just Steps 2 through 6. 6. When the start time is reached, a onesecond tone will sound and DELAY will go off. The display will show the set cook time. �Lo��, HEAT, TIMED and BAKE will light up on the display to show that the oven is heating. The display will count down the baking/roasting time in minutes. 9. When the baking/roasting time is cornpleted, the oven will turn off automatically, beep four times and �End� will show on the display. You will also hear four 1-second tones every minute until you push the Off/ Cancel pad. NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds. To reactivate tones, repeat this procedure. To cancel the MEALTIMER� control setting: l Push the Off/Cancel pad to return the display to the time of day.
