Yonr refrigerator comes equipped with twist ice cube tray's and a storage bin. To release frozen cubes hold the trays upside down over the storage bin and twist both ends.
� To manually stop the operation of the ice maker, move the wire lever arm into the up position. � Certain sounds may accompany the xarious operating cycles of the ice maker: buzzing of the water valve running of the water as the tray fills --rattling of ice cubes falling into an empty" ice bin � If the ice is not used frequently, the ice cubes will become cloudy, shrink, stick together and taste stale. Empty the ice storage bin periodically and wash it in lukewarm water. Be sure to dry the bin before replacing it. � To remove the ice bin, pull it forward, away fi'om the ice maker. To avoid the ice maker dulnping ice while the bin is removed, turn the ice maker off by lifting the wire lever. ° To replace the ice bin, reverse the above proceudre. Turn the ice maker on by lowering the wire arm. � Beverage and foods should not be placed in the ice storage bin fi)r quick chilling. These items can block the wire lever arm, causing the ice maker to malfunction.
Automatic
(optional)
Ice Maker
If your refrigerator is equipped with an automatic ice maker, there are some things to keep in mind about its operation: � After your refAgerator has been hooked up to the water supply, move the wire lever arm into the down position. This will start its operation. The ice maker will fill with water when the freezer reaches the proper temperature. With a newly installed refrigerator this could take up to 24 hours. � Discard 'all the cubes from the first two or three batches made. These initial batches of ice cubes may be irregular in shape and discolored, � When the ice cubes are ejected it is normal for several cubes to be joined together at the ends. They can easily be broken apart. The ice maker will continue to make ice until the supply of ice cubes raises the wire lever arm, shutting the ice maker off.
