|
Dla tego produktu nie napisano jeszcze recenzji!
VCR Playback
Before You Begin
Press the VCR button to set the remote control to operate the VCR deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR.
Playing a VHS Tape
1 Insert a prerecorded video cassette.
If the DVD Recorder+VCR is powered off, it will power on automatically. Make sure the TIMER indicator on the front panel display is not lit. If it is, press [POWER] once. If a tape without a safety tab is inserted, the DVD Recorder+VCR will start playback automatically.
� If the DVD Recorder+VCR is powered on by inserting a video cassette, playback will not start automatically.
2 Press [PLAY].
The PLAY icon appears on the TV screen. It is not necessary to select the tape speed (SP, SLP) for playback. It will be automatically selected by the DVD Recorder+VCR.
3 Press [STOP] to stop playback.
The STOP icon appears on the TV screen. If the tape reaches the end before [STOP] is pressed, the DVD Recorder+VCR will automatically stop, rewind, and eject the tape.
Tracking Control
Auto Tracking
The automatic tracking function adjusts the picture to remove snow or streaks. It works in the following cases: � When a tape is played for the first time. � When the tape speed (SP, SLP) changes. � When streaks or snow appear because of scratches on the tape. PLAYBACK
Manual Tracking
If noise appears on the screen during playback, press the [TRACKING +/-] buttons on the remote control until the noise on the screen is reduced. � In case of vertical jitter, adjust these controls very carefully. � Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds.
41
|
