JVC RX-6500VBKJ
Instrukcja Obsługi

Activating the DSP Modes
You can use only one DSP mode at a time. When a DSP mode is activated, another DSP mode is canceled if in use.

For the other DSP modes
On the front panel:

For Dolby Pro Logic, Dolby Digital, and DTS Digital Surround
On the front panel:

1. Press DSP MODE repeatedly until the mode you want appears on the display.
� Each time you press the button, the DSP modes change. (See page 20 for more details.)

DSP MODE

1. Press SURROUND so that the lamp next to the button lights up.
� Each time you press the button, the Dolby/ DTS Surround mode turns on and off alternately.

SURROUND

2. Select and play a sound source.
� To enjoy 3D-PHONIC and JVC Theater Surround, play back a software encoded with Dolby Surround and labeled with DOLBY SURROUND mark.

2. Select and play a sound source.
� To enjoy Dolby Pro Logic, play back a software encoded with Dolby Surround and labeled with DOLBY SURROUND mark. � To enjoy Dolby Digital, play back a software encoded with Dolby Digital and labeled with mark. � To enjoy DTS Digital surround, play back a software encoded with DTS Digital Surround and labeled with mark.
DIGITAL

To cancel the DSP mode
Press DSP MODE repeatedly until �DSP OFF� appears on the display.

DSP MODE

From the remote control:

To cancel the Dolby/DTS Surround mode
Press SURROUND again so that the lamp goes off. (�SURROUND OFF� appears on the display.)
SURROUND

1. Press SURROUND MODE repeatedly until the DSP mode you want appears on the display.
� Each time you press the button, the DSP modes change. (See page 20 for more details.)

SURROUND MODE

From the remote control:

2. Select and play a sound source.
SURROUND

1. Press SURROUND so that the lamp on the front panel lights up.
� Each time you press the button, the Dolby/ DTS Surround mode turns on and off alternately. � You can also turn on Dolby/DTS Surround mode by pressing SURROUND MODE. (See page 22 for more details.)

� To enjoy 3D-PHONIC and JVC Theater Surround, play back a software encoded with Dolby Surround and labeled with mark. DOLBY SURROUND

To cancel the DSP mode
Press SURROUND MODE repeatedly until �DSP OFF� appears on the display.

SURROUND MODE

2. Select and play a sound source.
� To enjoy Dolby Pro Logic, play back a software encoded with Dolby Surround and labeled with DOLBY SURROUND mark. � To enjoy Dolby Digital, play back a software encoded with Dolby Digital and labeled with mark. � To enjoy DTS Digital surround, play back a software encoded with DTS Digital Surround and labeled with mark.
DIGITAL

To cancel the Dolby/DTS Surround mode
Press SURROUND again. (�SURROUND OFF� appears on the display.)
SURROUND

25

English