JVC RX-7022RBK
Instrukcja Obsługi

Using the DVD MULTI Playback Mode
This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD player. Before playing back a DVD, refer also to the manual supplied with the DVD player.

From the remote control:

1

Press DVD MULTI.
Note:

DVD MULTI

Activating the DVD MULTI Playback Mode
You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output mode on the DVD player. Once you have made adjustments, the receiver memorizes the adjustments until you change them. You also need to set the DVD player to the analog discrete output mode. Before you start, remember.... There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

When you select �DVD MULTI� as the source to play, Surround mode is canceled, and the SURROUND ON/OFF and SURROUND MODE buttons do not work.

2

Select the analog discrete output mode on the DVD player, and start playing a DVD.
� Refer also to the manual supplied with the DVD player. If you need to make any adjustments, go to the following steps.

3 4

Press SOUND.
The 10 keys are activated for adjusting the sound.

SOUND

On the front panel:

Adjust the speaker output levels.
� To adjust the center speaker level, press CENTER +/� (�10 to +10).
2
� CENTER +
MENU

1

Press DVD MULTI.
Notes:

DVD MULTI

3

� When you select �DVD MULTI� as the source to play, the Surround mode is canceled, and the SURROUND ON/OFF and SURROUND MODE buttons do not work. � If you select the source to DVD MULTI while using both the speakers connected to the FRONT SPEAKERS 1 and 2 terminals, the speakers connected to the FRONT SPEAKERS
2 terminals are deactivated. � When selecting �DVD MULTI� as the source, you can only select either the speakers connected to the FRONT SPEAKERS 1 or 2 terminals.

� To adjust the left rear speaker level, press REAR�L +/� (�10 to +10).

� REAR � L +

5

ENTER

6

ENTER

� To adjust the right rear speaker level, press REAR�R +/� (�10 to +10).

8

� REAR � R +

9

2

Select the analog discrete output mode on the DVD player, and start playing a DVD.
� Refer also to the manual supplied with the DVD player. If you need to make any adjustments, go to the following steps.

3

Adjust the speaker output levels. 1) Press ADJUST repeatedly until one of the following indications appears on the display:

Creating Realistic Sound Fields / Using the DVD MULTI Playback Mode

ADJUST SETTING

CENTER :To adjust the center speaker output level (�10 to +10). REAR L : To adjust the left rear speaker output level (�10 to +10). REAR R : To adjust the right rear speaker output level (�10 to +10).

2) Press CONTROL UP 5/DOWN � to adjust the selected speaker output levels.

CONTROL DOWN UP

3) Repeat steps 1) and 2) to adjust the other speaker output levels.

32