JVC RX-889PGD
Instrukcja Obsługi

For the other DSP modes
��������������� MEMO ���������������

On the front panel:

1. Press DSP MODE repeatedly until the mode you want appears on the display.
� Each time you press the button, the DSP modes change. (See page 22 for more details.)

DSP MODE

Use this column to write down your DSP mode adjustments for your future reference.

2. Select and play a sound source.
� To enjoy 3D-PHONIC and JVC Theater Surround, play back a software: � encoded with Dolby Surround and labeled with DOLBY SURROUND mark. � encoded with Dolby Digital and labeled with mark. � encoded with DTS Digital Surround and labeled with mark. � encoded with MPEG Multichannel and labeled with mark.
DIGITAL

To cancel the DSP mode
Press DSP MODE repeatedly until �DSP OFF� appears on the display.
DSP MODE

From the remote control:

1. Press SURROUND MODE repeatedly until the DSP mode you want appears on the display.
� Each time you press the button, the DSP modes change. You can also turn on Dolby/ DTS/MPEG Surround. (See page 22 for more details.)

SURROUND MODE

2. Select and play a sound source.
� To enjoy 3D-PHONIC and JVC Theater Surround, play back a software: � encoded with Dolby Surround and labeled with DOLBY SURROUND mark. � encoded with Dolby Digital and labeled with mark. � encoded with DTS Digital Surround and labeled with mark. � encoded with MPEG Multichannel and labeled with mark.
DIGITAL

To cancel the DSP mode
Press SURROUND MODE repeatedly until �DSP OFF� appears on the display.
SURROUND MODE

28

English