|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
3.1.10 Removing the DC power board (See Fig.14) � Prior to perform the following procedures, remove the top cover, front panel assembly, rear panel and digital input board. (1) From the top side of the main body, disconnect the wires from the connectors (CN201, CN206, CN207, CN211, CN218, CN510, CN520, CN711) on the DC power board. (2) Disconnect the parallel wire from the connector CN712 on the amp. board. (3) Remove the two screws M attaching the DC power board.
CN218 CN520 CN510 CN210
DC power board CN711 CN206
M
CN207
M
Fig.14
CN211
CN712
Amp. board
3.1.11 Removing the main board (See Fig.15) � Prior to perform the following procedures, remove the top cover, front panel assembly, rear panel, digital input board, digital output board, AC power supply board and DC power board. (1) From the top side of the main body, disconnect the wires from the connector CN525 on the main board. (2) Disconnect the wires from the connectors CN516 and CN519 on the amp board. (3) Remove the two screws N attaching the main board. Reference: � When attaching the two screws N, attach the wire holder with it. 3.1.12 Removing the amp. board (See Fig.15) � Prior to perform the following procedures, remove the top cover, front panel assembly, rear panel, digital input board, digital output board, AC power supply board and DC power board. (1) From the top side of the main body, disconnect the wires from the connectors CN516 and CN519 on the amp. board. (2) Disconnect the wire from the connector CN525 on the main board. (3) Disconnect the wire from the connector CN703 on the rectifier board. (4) Remove the four screws P attaching the amp. board.
CN516 Wire holder
Amp. board CN519 Rectifier board CN703
P
P
CN525 Main board
N
Fig.15
P
P
1-10 (No.22070)
|
