JVC RX-F31UJ
Instrukcja Obsługi

4 Press SET.

DIGITAL IN 1 DIGITAL IN 1:2DVR/DVD3

O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE x ATT HP MHz kHz

The current setting of the selected item appears.

23:OPERATE

:BACK

The selected submenu appears.

5 To select the appropriate setting, press
DIGITAL IN 1

2 or 3 repeatedly, then press SET.
The on-screen display returns to the previous SETTING MENU. In this example, �SETTING MENU (4)� appears on the TV screen and �DIGITAL IN1� appears on the display. � On the front panel, turn MULTI JOG, then press SET.
DIGITAL IN 1:2DVR/DVD3

O P. BASS TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE x ATT HP MHz kHz

DVR/DVD TV

DBS VCR

6 Repeat steps 2 to 5 to set other items
if necessary.
NOTES � To return to �TOP MENU,� press MENU on the remote control. � To exit from menu operations, press MENU on the remote control when �TOP MENU� appears. On the front panel, press SETTING when a menu except �TOP MENU� appears. � The setting item previously selected can be shown on the TV screen by pressing SETTING on the front panel when the receiver is in normal operation mode.

Setting the items
When performing the basic settings viewing the indications on the display, the indications are slightly different from what is shown on the on-screen display. This is because of the limited number of characters shown on the display. Ex.: � �SUBWOOFER: YES� is shown as �SUBWFR: YES� on the display. � �MIDNIGHT MODE: OFF� is shown as �NIGHT: OFF� on the display.

Setting the speakers
7 Setting subwoofer information�SUBWOOFER
Each time the receiver turns on, the receiver detects the subwoofer connection and automatically changes the setting of the subwoofer. When you want to change the setting manually, select either one below.

7 Setting the speaker size�FRONT SPEAKER, CENTER SPEAKER, SURROUND SPEAKER, SURROUND BACK SPEAKER
Register the sizes of all the connected speakers. LARGE SMALL Select when the cone speaker size is larger than 12 cm. Select when the cone speaker size is smaller than 12 cm. Select when you have disconnected a speaker. (Not selectable for the front speakers.)

SUBWOOFER: YES Select when you have connected a subwoofer. The subwoofer indicator ( S . WFR ) lights up on the display. You can adjust the subwoofer output level (see page 29). SUBWOOFER: NO Select when you have disconnected a subwoofer. Selecting this changes the front speaker size to �LARGE� (see right column). NOTE You need to change the setting each time you turn on the receiver if you want to change the subwoofer information set automatically.

NO

Initial setting: SMALL for all speakers* * When �SUBWOOFER� is set to �SUBWOOFER: NO,� the front speaker size is fixed to �LARGE� (and you cannot select �SMALL�). NOTES � If you have selected �SMALL� for the front speaker size, you cannot select �LARGE� for other speakers. � When �SURROUND SPEAKER� is set to �SURROUND SPK: SMALL,� you cannot select �LARGE� for the surround back speaker. � When �SURROUND SPEAKER� is set to �SURROUND SPK: NO,� the surround back speaker is fixed to �NO.� � If you change one of the speaker sizes either from �NO� to �SMALL� or �LARGE,� or from �SMALL� or �LARGE� to �NO,� the distance manually set will be applied instead of those set by using Smart Surround Setup.

21

English