Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 26 (kliknij aby zobaczyć)
Unscrew the top handle bracket from the handle rod (1). Unscrew the bottom handle bracket from the door (2). 13. Unscrew the top handle bracket from the door (3) and screw onto the bottom righthand side of the door (4). 14. Turn the handle bracket with the handle rod 180° and screw them to the door (5) and the fitted handle bracket (6). 15. Move the small plug from right to left. Attention! Do not overtighten the screws (max. 2 Nm) as you may damage the door handles. After having reversed the opening direction of the doors check that all the screws are properly tightened and that the magnetic seal adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. in that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.
