Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 9 (kliknij aby zobaczyć)
Cleaning and Care
Outside of the appliance
Important: Do not use cleaning agents for stainless steel or other aggressive or abrasive cleaning agents. The protective coat of lacquer on the stainless steel surface can be damaged by these. The coat of lacquer protects against finger prints and therefore additional cleaning agents and maintenance products are no longer required. � Clean the appliance with a cloth and lukewarm water. Commercially available dish washing detergents may also be used. � After cleaning wipe with fresh water and rub dry. For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly. Warning! � The appliance may not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning switch the appliance offand rem ve the plug from the mains, or switch off or turn out the circuit breaker or fuse. � Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components, danger of electrical shock! Hot vapours can lead to the damage of plastic parts. � The appliance must be dry before it is placed back into service. Attention! � Ethereal oils and organic solvents can attack plastic parts, e.g. � lemon juice or the juice from orange peals; � butyric acid; � cleansers which contain acetic acid. Do not allow such substances to come into contact with appliance parts. 1. 2. 3. 4. 5. � Do not use any abrasive cleansers. Remove frozen food and the food from the refrigerator. Wrap frozen food in several layers of newspaper. Store it in a cool place, well covered. Defrost the freezer compartment prior to cleaning (see "Defrosting" section). Switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse. Clean the appliance and the interior accessories with a cloth and lukewarm water. Commercially available dish washing detergents may also be used. After cleaning wipe with fresh water and rub dry.
- Remove the upper plastic plug of the freezer door and reinsert on the opposite side. - Remove the upper plastic plug of the refrigerator door and reinsert on the opposite side. - Unscrew the upper hinge pivot (G) of the refrigerator and rescrew it on the opposite side. - Remove with a tool the cover (e) unscrew the lower hinge pivot (F) and rescrew on the opposite side - Refit the cover (e) on the opposite side. - Insert the middle hinge pivot into hole on the left of the refrigerator door. - Insert the refrigerator door on the lower hinge pivot (f) . - Insert the freezer door on the upper hinge pivot and tilt slightly the doors and insert the middle hinge pivot into the hole on the left side of the freezer door. - Opening the doors, fix the middle hinge on the left side with two screws. Do not forget the plastic spacer that must be placed under the middle hinge (H). Pay attention that the border of the doors are parallel to the top border. - Unscrew the handles. Refit them on the opposite side after having piercing the plugs with a punch. Cover the holes left open with the plugs contained in the documentation pack. Reposition, level the appliance and connect it to the mains socket.
