Defrosting
Refrigerator
Frost is automatically eliminated during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, where it evaporates. We recommend that you peridically clean the defrost-water drainage outlet with the cleaner provided, located in the center of the drainage groove.
A
B
NP005
D037
Freezer
The freezer compartment, will become progrssively covered with frost. This should be removed with al plastic scraper. Whenever the tickness of the frost exceeds 4 mm complete defrosting should be carried out as follows: pull out the plug from the wall socket or turn the thermostat knob to th �0� setting. remove any stored food, wrap it in several layers newspaper and put it in a coll place. leave the door open. when defrosting is completed, dry the interior thoroughly turn the thermostat knob to the required setting or raplace the plug in the power socket. Attention Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. A temperature rise of the frozen food packs, during defrosting , may shorten their safe storage life.
10 100 mm
1. 2. 3. 4. 5.
Espaçadores posteriores
Na bolsinha da documentação encontram se dois espaçadores que hão de ser montados nos cantos superiores da parte traseira. Desapertar os parafusos, inserir o espaçador debaixo da cabeça do parafuso e voltar a apertar.
PR153
10 mm
Switching off the appliance
1. 2. 3. 4. 5. To switch off the appliance, turn the temperature regulator to position "0". If the appliance is not going to be used for an extended period: Remove all refrigerated and deep-frozen packages as well as ice trays. Switch off the appliance . Remove the mains plug or switch off or turn out the circuit breaker or fuse. Defrost freezer compartment and clean thoroughly (see section: �Cleaning and Care�). Leave the door open to avoid the build up of odours.
15
Reversibilidade das portas
Antes de qualquer operação tire a ficha da tomada de corrente. Para a inversão aja da seguinte maneira: remover a dobradiça superior e o suporte superior verificando que a porta superior não se desenganche: