...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 39 (kliknij aby zobaczyć)
SA-HT640WP / SA-HT640WPC
Step 4 Remove the mechanism base block.
10.6. Disassembling the Rear Panel
· Follow (Step 1) to (Step 2) of Item 10.3. Step 1 Remove 7 screws. Step 2 Detach the FFC cable from connector (CN5704). Step 3 Release the claws of the rear panel in the directions. Step 4 Remove the rear panel in the direction of arrow.
10.8. Disassembling the FL & Head phone P.C.B.
· Follow (Step 1) to (Step 7) Item 10.4. Step 1 Remove 3 screws. Step 2 Remove the panel angle.
Step 3 Remove 7 screws.
10.7. Disassembling the Mechanism Base Assembly
· Follow (Step 1) to (Step 3) Item 10.5. Step 1 Remove 2 screws on each side of the mechanism base block. Caution: Take note of the screw type used. During assembling, use the correct screw type and at the correct location. Step 2 Remove the tab. Step 3 Detach FFC cables at connectors (CN2005 & CN2001).
Step 4 Remove the FL & Head phone P.C.B.
10.9. Disassembling the Main P.C.B.
· Follow (Step 1) to (Step 4) of Item 10.6. · Follow (Step 1) to (Step 4) of Item 10.7. Step 1 Remove 3 screws and 2 screw covers. Step 2 Detach the FFC cables from connectors (CN2011, CN5701, CN5708). Step 3 Remove the sheild plate. Step 4 Remove the Main P.C.B. 39
