jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 66 (kliknij aby zobaczyć)
SA-PT950P / SA-PT950PC
Caution: Handle the heatsink unit D with caution due to its high temperature after prolonged use. Touching it may lead to injuries.
Caution: Handle the small heat sink with caution due to its high temperature after prolonged use. Touching it may lead to injuries.
Note : Refer to the diagrams of SMPS P.C.B. (Item 10.18.) for location of the parts.
Note : Refer to the diagrams of SMPS P.C.B. (Item 10.18.) for location of the parts.
10.24. Disassembly of Tray Guide (L) & Tray Guide (R)
· Follow (Step 1) to (Step 3) of Item 10.3. · Follow (Step 1) to (Step 3) of Item 10.4. · Follow (Step 1) to (Step 4) of Item 10.5. · Follow (Step 1) to (Step 4) of Item 10.7. Step 1 Remove 2 screws from the tray guide (L) and the tray guide (R) . Step 2 Remove the tray guide (L) and the tray guide (R) in the direction of arrow.
10.23. Disassembly of Regulator Diode (D5702)
· Follow (Step 1) to (Step 3) of Item 10.3. · Follow (Step 1) to (Step 3) of Item 10.4. · Follow (Step 1) to (Step 4) of Item 10.5. · Follow (Step 1) to (Step 4) of Item 10.7. · Follow (Step 1) to (Step 7) of Item 10.18. Step 1 Desolder pins of the regulator diode (D5702) on the back side of SMPS P.C.B.
10.25. Disassembly of Rotary Tray
· Follow (Step 1) to (Step 3) of Item 10.3. Step 2 Remove 1 screw. Step 3 Remove the regulator diode (D5702) from the small heat sink. · Follow (Step 1) to (Step 3) of Item 10.4. · Follow (Step 1) to (Step 4) of Item 10.5. · Follow (Step 1) to (Step 4) of Item 10.7. Step 1 Remove the screw and the tray spring. Step 2 Remove the rotary tray in the direction of arrow. 66
