jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 11 (kliknij aby zobaczyć)
SAT-W60 SECTION 3 SYSTEM SELF TEST
SELF TEST:
1. From home page go to [settings]. 2. Go to [system test]. a. Connect a phone line to the phone jack on the back of the unit. b. Connect both tuners to a SAT signal. c. Make sure that the CAM card is in. 3. Press [Run Test]. This test checks both tuner's signal and that the modem detects a dial tone. Also, it checks that the CAM card is inserted and valid. Test will show the serial number on the card. 4. Go to [Receiver Info] from the same system test menu. This provides the following information on the box: � Manufacturer: Sony Model number: � Serial number: � Client software: � Boot rom version: � SSID: 5. To show the date the box was last upgraded along with the version, select [Upgrades] from the SAT receiver information menu. 6. Go to the settings menu and select [Hooking Up] 7. Go to [Signal Strength] This will show the signal strength for each tuner. It is also possible to change transponder numbers to verify both even and odd transponders.