|
|
|
Kto jest w sklepie?
Sklep przegląda 5566 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Installation
Headphone battery replacement (�gure 3)
IMPORTANT Use only rechargeable LR03/AAA NiMH batteries (preferably Philips). Do not use NiCd batteries or alkaline batteries as these may damage your FM wireless system! 1 Open the headphone�s battery compartment. 2 Take out the batteries and dispose of them properly. 3 Insert new batteries. Only use LR03/AAA NiMH batteries (preferably Philips). 4 Make sure the batteries are correctly inserted as indicated by the engraved symbols in the battery compartment. 5 Close the battery compartment. IMPORTANT Before using the FM headphone for the �rst time, please ensure that the batteries are fully charged for about 16 hours.This will guarantee a longer operating lifetime of the batteries. Connecting the FM transmitter to a headphone output of an audio source (�gure 4) 1 Connect the 3.5mm stereo plug of the stereo audio cable to the headphone output of an audio source, such as TV, HiFi or PC. � In case your audio source has a 6.3mm headphone output, use the supplied 3.5mm to 6.3 mm stereo adapter plug.
Audio Connections
2 Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal. 3 Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter. 4 To tune, turn the tuning wheel until the signal is at its clearest and the tuning indicator will light up. 5 Adjust the volume to the desired level with the headphone volume control. Basic operation When the FM transmitter is connected to a headphone output of an audio source. 1 Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal. 2 Switch on the headphone.You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter. 3 To tune, turn the tuning wheel until the signal is at its clearest and the tuning indicator will light up. 4 Adjust the volume to the desired level with the headphone volume control. English 7
|
|
|
> |
|
