WHIRLPOOL SC8630EDB0
Instrukcja Obsługi

4. If ports are clogged, clean with a straight pin. Do not enlarge or distort port. Do not

use a wooden toothpick. If adjustment Is needed, call a qualified technician for
service.

6. Turn on the burner to determine if it will light. If the burner does not light after cleaning, contact an authorized Whirlpool service technician. Do not service the sealed burner yourself.

5. After cleaning the gas tube opening and ports, replace the burner cap.

Cleaning
PART Control knobs

chart
WHAT TO USE
Sponge and warm, soapy water
l

Use the following table to help you clean all parts of your cooktop.

HOW TO CLEAN
Turn knobs to OFF and pull straight away from control panel. Wash, rinse and dry thoroughly. Do not soak.

l

l Dondusesteelwoolorabmslvecleansers.
Theymaydamagethefinishoftheknobs.
l

Replace knobs. Make sure all knobs point to OFF. Wash, rinse and dry thoroughly. Be sure to wring excess water from sponge before wiping around controls. Excess water in or around controls may cause damage to the cooktop.

Control panel and trim

Sponge and warm, soapy water OR Paper towel and spray glass cleaner

l l

l DonotueesteelHlodorabrasivecleansers.
They may damgta the finish.
l

Do not spray cleaner directly on panel. Apply cleaner to paper towel. Wash, rinse and dry thoroughly. Use nonabrasive, plastic scrubbing pad on heavily soiled areas.

Cooktop surface
(other than control panel)

Sponge and warm, soapy water

l l

l

Do not use abrasive or harsh cleansers. They may damage the finish. NOTE: Do not allow foods containing acids

(such as vinegar, tomato or lemon juice) to remain on surface. Acids may remove the glossy finish. Also wipe up milk or egg spills when cook-top is cool.

Surface burners, grates, caps, and contoured well area
12

See pages 1O-12 for cleaning instructions.