Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 20 (kliknij aby zobaczyć)
Changing sound field and quality
» quality A
SC-EH760 MULTI JOG
Changing sound field and
Changes to sound field and quality have no effect on recordings.
[SC-EH760]
Turn [MULTI JOG] to select a setting.
[SC-EH560]
Press [EQ] to select a setting.
2
SC-EH560
13
EQ
Each time you turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560): HEAVY: Adds punch to rock. CLEAR: Clarifies higher sounds. HALL: Expands sound to make you feel like you were in a hall. AI-EQ: Adjust sound with the acoustic image equalizer (¬ page 21). M.EQ: Create your own effects (¬ see below). FLAT: Canceled (no effect is added).
2
A
SC-EH760 SC-EH560
MULTI JOG
EQ
13
On the remote control
Press [EQ]. Note Turn off the effect if sound quality reduces when using HALL or 3D AI EQ with a source.
(On the tuner amplifier)
(On the sound processor)
SC-EH760
FLAT HEAVY CLEAR
HALL AI-EQ M.EQ
SC-EH560
FLAT HEAVY CLEAR HALL AI-EQ M.EQ
» B
Using the manual equalizer
[SC-EH760]
Create your own sound quality effects.
1
B
Turn [MULTI JOG] to select �M.EQ�.
[SC-EH560]
MULTI JOG
1 2 3
1
Press [EQ] to select �M.EQ�.
(On the sound processor)
EQ
FLAT HEAVY CLEAR HALL AI-EQ M.EQ
2
Press [3D AI EQ/M.EQ BAND] to select the band.
Each time you press the button: LOW>MID>HIGH ^------------------------}
3D AI EQ/ M.EQ BAND
(On the tuner amplifier)
3
2
MULTI JOG
MULTI CONTROL
1 Select the frequency you want to use as the peak with [", !]. 2 Adjust the level of the peak with [#, $]. ³Adjacent frequencies are adjusted at the same time to maintain a smooth curve. ³When you have adjusted the curve, you can move the peak of the curve by pressing [", !] (a). (On the sound processor)
MID
Use [", !, #, $] to make the required curve.
1 2 1
FLAT HEAVY CLEAR HALL AI-EQ M.EQ
Repeat steps 2 and 3 to adjust the three bands. The original display is restored on the display panel in about 5 seconds.
To cancel
Turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560) to select �FLAT�.
LOW
HIGH
2
FLAT HEAVY CLEAR HALL AI-EQ M.EQ
a
FLAT HEAVY CLEAR HALL AI-EQ M.EQ
Note ³The changes you make are stored and automatically recalled the next time you select �M.EQ�. ³After making a curve in one band, any adjustments in another band make a curve that is a combination of the two.
[C] To flatten the curves in all three bands
Set the frequencies b in LOW, c in MID, and d in HIGH to flat.
