PANASONIC SC-EH760
Instrukcja Obsługi

Changing sound field and quality

» quality A
SC-EH760 MULTI JOG

Changing sound field and

Changes to sound field and quality have no effect on recordings.

[SC-EH760]

Turn [MULTI JOG] to select a setting.
[SC-EH560]

Press [EQ] to select a setting.

2
SC-EH560

13
EQ

Each time you turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560): HEAVY: Adds punch to rock. CLEAR: Clarifies higher sounds. HALL: Expands sound to make you feel like you were in a hall. AI-EQ: Adjust sound with the acoustic image equalizer (¬ page 21). M.EQ: Create your own effects (¬ see below). FLAT: Canceled (no effect is added).

2
A
SC-EH760 SC-EH560
MULTI JOG
EQ

13

On the remote control
Press [EQ]. Note Turn off the effect if sound quality reduces when using HALL or 3D AI EQ with a source.

(On the tuner amplifier)

(On the sound processor)

SC-EH760
FLAT HEAVY CLEAR
HALL AI-EQ M.EQ

SC-EH560
FLAT HEAVY CLEAR HALL AI-EQ M.EQ

» B

Using the manual equalizer
[SC-EH760]

Create your own sound quality effects.

1

B

Turn [MULTI JOG] to select �M.EQ�.
[SC-EH560]
MULTI JOG

1 2 3
1

Press [EQ] to select �M.EQ�.
(On the sound processor)
EQ
FLAT HEAVY CLEAR HALL AI-EQ M.EQ

2
Press [3D AI EQ/M.EQ BAND] to select the band.
Each time you press the button: LOW>MID>HIGH ^------------------------}

3D AI EQ/ M.EQ BAND

(On the tuner amplifier)

3
2
MULTI JOG
MULTI CONTROL

1 Select the frequency you want to use as the peak with [", !]. 2 Adjust the level of the peak with [#, $]. ³Adjacent frequencies are adjusted at the same time to maintain a smooth curve. ³When you have adjusted the curve, you can move the peak of the curve by pressing [", !] (a). (On the sound processor)
MID

Use [", !, #, $] to make the required curve.

1 2 1
FLAT HEAVY CLEAR HALL AI-EQ M.EQ

Repeat steps 2 and 3 to adjust the three bands. The original display is restored on the display panel in about 5 seconds.

To cancel
Turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560) to select �FLAT�.

LOW

HIGH

2
FLAT HEAVY CLEAR HALL AI-EQ M.EQ

a
FLAT HEAVY CLEAR HALL AI-EQ M.EQ

Note ³The changes you make are stored and automatically recalled the next time you select �M.EQ�. ³After making a curve in one band, any adjustments in another band make a curve that is a combination of the two.

[C] To flatten the curves in all three bands
Set the frequencies b in LOW, c in MID, and d in HIGH to flat.

C
FLAT HEAVY HALL AI-EQ

20
RQT5355

CLEAR

b

c

d

M.EQ