|
|
|
Kto jest w sklepie?
Sklep przegląda 5746 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Sound effect
Muting the sound
DRIVE SELECT
Press [MUTING].
�MUTING� flashes on the unit's display.
To cancel Press [MUTING] again or reduce the volume to minimum �VOL 0�, then raise it to the required level. Muting is cancelled when you switch the unit to standby.
Adjusting the subwoofer level Press [SW.LEVEL].
, ,, ENTER Each time you press the button: SUB WOOFER 1 SUB WOOFER 2 SUB WOOFER 3 SUB WOOFER 4 (factory preset) The setting you make is retained. This cannot be set when headphones are connected.
SW.LEVEL, MIX 2CH CH SELECT
SRD MUSIC
MUTING
Speaker level adjustments Dolby Digital and DTS
Dolby Digital and DTS are digital encoding systems used on DVD to carry surround sound. Both were originally developed for use in cinemas. This unit automatically recognizes and decodes these systems. Software encoded with Dolby Digital can be identified with this mark. Software encoded with DTS can be identified with this mark. Adjust the level of the speakers so they are the same apparent level as the front speakers where you would normally be sitting and listening. Preparation Press [DRIVE SELECT] to select the DVD drive. Turn off the other sound effects. This cannot be set while �Surround Music� (� page 35) is set to �ON� (�ERROR� is displayed in the display window). Please set this once Surround Music is set to �OFF�.
When stopped or playing discs with 2 channel or monaural audio
You can adjust the balance of the front speakers. You can also adjust the L/R Surround speakers while �Sound Field Control (SFC)� or �Surround Enhancer� is set to on. Please perform the following �When playing Multi-channel discs� operations.
Play a Dolby Digital or DTS source.
The Dolby Digital or DTS indicator lights.
1
To down-mix Dolby Digital or DTS (multiplechannel) signals to 2 channels
Press and hold [MIX 2CH].
Press and hold [CH SELECT].
L R
2 1 2
Press [ , balance.
] to adjust the �L�, �R�
To cancel, press and hold [MIX 2CH] again. This cannot be set while �Surround Music� or �Surround Enhancer� (� page 35) is set to �ON� (�ERROR� is displayed in the display window). Please set this once �Surround Music� or �Surround Enhancer� is set to �OFF�.
When playing Multi-channel discs
Press and hold [CH SELECT].
L R
While the screen above is being displayed
Press [CH SELECT] to select the speaker.
When �D.MIX� flashes on the display [DVD-A] The DVD-Audio contains multiple-channel signals that cannot be down-mixed. L, R Cch RSch LSch SWch SW: Subwoofer You can only adjust SW if there is output from the subwoofer channel.
3
RQT8655
Press [ ] (to increase) or [ ] (to decrease).
L, R: Press [ , ] to adjust the �L�, �R� balance. C, RS, LS: 6 dB to 6 dB SW: 6 dB to 6 dB
36
|
|
|
> |
|
