|
|
|
Kto jest w sklepie?
Sklep przegląda 5995 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Troubleshooting
SYSTEM SETUP
� MODEM TEST : Use this feature to hear various transmission signals to the telephone line from the modem and to check the modem. If no transmission signal sound is heard, it means that the modem part of the main board is poor. � DTMF TEST : DTMF (Dual Tone Multi Frequency) signal. When you press any key on the number keypad including * and #, you will hear the corresponding key tone.
FAX SETUP
� MODEM SPEED : You can set the maximum modem speed. Communication is done with modem speed automatically set at lower speed when communicating with the modem with lower speed since communication is done on the standard of the side where modem speed is low for transmission/reception. It is better set 26.4KBPS as default setting. � SEND FAX LEVEL : You can set the level of the transmission signal. Typically, the Tx level should be under -12 dBm.
Caution : The Send Fax Level is set at the best condition in the shipment from factory. Never change settings arbitrarily.
� ROM TEST : Use this feature to test the machine'S ROM. The result and the software version appear in the LCD display.
� PROGRAM DOWNLOAD : Use this feature to download a new upgraded ROM file from a PC which is connected to the machine with a parallel cable (IEEE 1284). < Download > 1. Connect printer to PC with a parallel cable(IEEE 1284.) 2. Select the PROGRAM DOWNLOAD function at the TECH MODE. 3. Input COPY/B FILENAME PRN at the MS-DOS and push the ENTER key. (filename : the latest ROM file name when the downloading) 4. After the download is completed, the system will be automatically initialized.
� RCV FAX LEVEL : - You can set the level of the receiving signal. - The reception level may be too low due to the cable losses. - If it is set to -43 dBm, the reception sensitivity will be between 0 and -43 dBm. If it is set to -48 dBm, the reception sensitivity will be between 0 and -48 dBm.
Caution : The Send Fax Level is set at the best condition in the shipment from factory. Never change settings arbitrarily.
� DTMF HIGH LEVEL : Select high frequency level when dialing in the MF mode.The input range is between 00~15dBm.
Caution : The Send Fax Level is set at the best condition in the shipment from factory. Never change settings arbitrarily.
� DTMF LOW LEVEL : Select high frequency level when dialing in the MF mode.The input range is between 00~15dBm.
Caution : The Send Fax Level is set at the best condition in the shipment from factory. Never change settings arbitrarily.
� KEY TEST The function is to test the capacity of product in the production progress. Service person doesn't need to use it. � PAUSE TIME : Pause time mean delay time (unit: second) inserted between dial number signal and the next number of signal in the automatic dial (One touch, Speed dial, Redial) and the manual dial.
Caution : The Send Fax Level is set at the best condition in the shipment from factory. Never change settings arbitrarily.
� ERROR RATE : - When the error rate is about to be over the setting value, the Baud rate automatically lowers up to 2400 bps to make the error rate remain below the setting value. - You can select the rate between 5% and 10%.
Samsung Electronics
4-3
|
|
|
> |
|
