Maintenance and Care
� Always switch off the power supply pull out the plug before cleaning the appliance! � After use, wipe the spindrum dry with a cloth. � If dirty washing has been spun, it is necessary to rinse the drum out with clear water in order to avoid soiling the next load of washing. � Clean the exterior of the spin dryer with a damp cloth and wipe it dry. � Use a solution of water and mild washing up liquid only to clean the appliance. � Do not use abrasive cleaning agents. � Never use petrol or other solvent liquids. � The spin dryer requires no other maintenance.
If unexpected difficulties arise
� Before contacting your local Service Force Centre, check whether the fault is due to one of the following minor causes.
The motor does not function: � Has the fuse blown? � Is there damage to the mains cable, plug or socket? Turn off the power supply. Pull out the plug before checking! � Never open the motor yourself! Water does not flow out: � Switch off the power supply. Pull out the plug! Check whether the outlet spout is blocked by a piece of washing. � Press the spin drum from the inside against the outer casing with your hand and remove the piece of washing. The spin dryer does not pick up spin speed: � Please note that the spin dryer normally overcomes a certain amount of unbalance itself when picking up spin speed. The motor and spin drum are suspended flexibly for that reason. � However, if the unbalance is too great (brought about by incorrect loading of the spin dryer), the machine cannot pick up spin speed. The spin dryer �jumps�: 1. Switch off the spin dryer immediately! 2. When the drum has come to a standstill, repack the washing evenly. 3. Reload the spin dryer in accordance with the
Model Filling amount (Kg) Spin speed (r.p.m.) Height (cm)