Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 32 (kliknij aby zobaczyć)
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service. Symptom No power. The power is on, but the DVD/CD Receiver does not work. No picture. Cause � The power cord is disconnected. � No disc is inserted. Correction � Plug the power cord securely into the wall outlet. � Insert a disc.
� The TV is not set to receive DVD signal output. � The video cable is not connected securely. � The connected TV power is turned off. � The VIDEO OUTPUT SELECTOR is not set correctly (see page 9).
� Select the appropriate video input mode on the TV so the picture from the DVD/ CD Receiver appears on the TV screen. � Connect the video cable into the jacks securely. � Turn on the TV. � Make sure the VIDEO OUTPUT SELECTOR is set according to the connections (see page 10). � Select the correct system according to the system of your TV (see page 27). � Select the correct input mode of the audio receiver so you can hear the sound from the DVD/CD Receiver. � Connect the audio cable into the jacks securely. � Turn on the equipment connected with the audio cable. � Replace it with new one. � Clean the disc. � Insert a disc. � Insert a playable disc. (Check the disc type, colour system and Regional code.) � Place the disc with the playback side down. � Place the disc on the disc tray correctly inside the guide. � Clean the disc. � Press the SET UP button to turn off the menu screen. � Cancel the Rating function or change the rating level. � Clean the disc. � Connect the speakers and components securely. � Move your TV away from the audio components.
Scrolling or/and abnormal colour picture.
� Wrong system selection.
There is no sound or only � The equipment connected with the a very low-level sound is audio cable is not set to receive DVD heard. signal output. � The audio cables are not connected securely. � The power of the equipment connected with the audio cable is turned off. � The audio connecting cable is damaged. The playback picture is poor. The DVD/CD Receiver does not start playback. � The disc is dirty. � No disc is inserted. � An unplayable disc is inserted. � The disc is placed upside down. � The disc is not placed within the guide. � The disc is dirty. � A menu is on the TV screen. � The Rating level is set. Loud hum or noise is heard. � The disc is dirty. � The speakers and components are connected poorly. � The DVD/CD Receiver is located too close to the TV.
