Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
DISASSEMBLY INSTRUCTIONS
1-6: DVD DECK (Refer to Fig. 1-6) 1. Make the short circuit on the position as shown Fig. 1-6 using a soldering. If you remove the DVD Deck with no soldering, the Laser may be damaged. 2. Disconnect the following connectors: (CP2601, CP2602, CP2603). 3. Remove the 4 screws 1. 4. Remove the DVD Deck in the direction of arrow.
1 1 1 11 11 1
Make the short circuit using a soldering. Pick Up PCB
1-8: AV PCB/RELAY PCB (Refer to Fig. 1-8) 1. Remove the 6 screws 1. 2. Remove the 2 screws 2. 3. Remove the AV PCB and Relay PCB in the direction of arrow.
2
Relay PCB
AV PCB
2
DVD Deck
1
1
Fig. 1-8
Fig. 1-6 1-7: DVD PCB (Refer to Fig. 1-7) 1. Disconnect the following connectors: (CP2001 and CP8002). 2. Remove the 4 screws 1. 3. Remove the 3 screws 2. 4. Remove the screw 3. 5. Remove the DVD PCB in the direction of arrow.
1 1 1 1
