|
|
|
Kto jest w sklepie?
Sklep przegląda 5636 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dokładna dokumentacja, pomogła w szybkiej naprawie telewizora. Dziękuję!
 ;
jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
1.3 The DVD drive does not work. When the DVD drive does not work after the power is turned on, check the following items and repair or replace the defective parts. (1) Press the DISC cover switch and turn on the power. Then check whether or not the optical pick-up lens of the DVD drive lights. CAUTION: Visible laser radiation when open and interlock defeated. Do not stare into Laser beam. The optical pick-up lens lights dim: It is caused by deterioration of the optical pick-up lens. Replace the DVD drive. The optical pick-up lens does not light: Check the connectors of the DVD-FFC. Also check the connection to the main PCB and to the DVD drive. Loose connection is found. Repair the connection, and then check the operation of the DVD drive again. The DVD-FFC is broken. Replace the DVD drive. Other than the above. Replace the DVD drive or the main PCB. (2) Insert a DVD disc and turn on the power The DVD drive does not work: The motor of the DVD drive or the main PCB is defective. Replace the DVD drive or the main PCB. The DVD drive works but the initializing operation of the optical pick-up lens does not start, or abnormal noise sounds: The DVD drive is defective. Replace the DVD drive. 1.4 The operation of the DVD player stops at initializing display. If the DVD player does not work after the initializing screen is displayed, check the indication on the screen. Then repair the defect according to it. (1) Insert a DVD disc and close the DISC cover, and turn on the power. Then check the LCD screen or connect the player to your TV. The message �loading� is not displayed or the operation stops at the message �Loading�. Since the DVD drive or the main PCB is defective, check in the following order: 1) DVD drive 2) Main PCB The message �CHECK DISC� is displayed. Check the DVD disc for fingerprints, dirt, etc. If the DVD disc is OK, then check the following items: 1) Check the DVD-FFC If a loose connection, repair the connection. If it is damaged, replace the DVD drive. 2) Other than above For other cases, replace the unit in the following order: DVD drive (defective optical pick-up) Main PCB
|
|
|
> |
|
