Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 34 (kliknij aby zobaczyć)
Recording
2
Automatic recording (motion pictures)
1
Set to [
].
2 3
To change aspect ratio to 4:3
�[ADVANCED]� [ASPECT]�[4:3] Default aspect ratio at the time of purchase is set to 16:9 (widescreen).
Press Start recording.
Recording mode
.
Time elapsed
To remove sound when record button is pressed
�[SETUP]� [BEEP SOUND]�[OFF]
Recording in progress (red) Time remaining (flashes red when under 1 minute)
Recording continues even if the LCD monitor is closed.
To remove on-screen display
�[SETUP]� [DISPLAY]�[OFF]
4
Stop recording.
Paused (green)
The unit is still recording if [ ] is red. Do not move the unit. � When the unit is running on battery power, power is automatically shut OFF to conserve battery life if no operations are performed for about 5 minutes. To reuse the unit, set the mode dial to [OFF] and then reselect a mode. To prevent power from shutting OFF automatically: (P.84 [POWER SAVE]) � The interval between starting and stopping recording is recorded as one single scene. The counter is reset to �0h00m00s� after each scene. � At the time when the unit is purchased, the audio recording mode is set to [DOLBY]. For playback in a device which does not support Dolby Digital, set [AUDIO REC] to [MPEG]. (P.84)