Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
Surface Burners
Lift up the cooktop, Wipe oft surface use. following the instructis soapy 1son page1 1. water and a soft cloth after each burners with warm
Occasionally check surface burner flames for size and shape as shown. If flames do not burn properly, you may need to remove the surface burners for cleaning (see pagel5), or call a qualified technician for burner adjustments.
To adjust the LO settings on the control knobs:
1.
Turn on the surface
burners, then set the controls
on LO,
2. WIthout changing
the burner settlngs, remove the control knobs.
3. Firmly grasp the control stem and insert a small bladed screwdriver into the end of the stem. Turn the screwdriver in either direction until the flame height is Yain (38 cm) or lower in size. Flame must be large enough to
malntaln
a STABLEFLAME on all burner pork.
NEVERADJUST THE FLAME SIZE AT THE MEDIUM SETTING.
The Upper Oven Rack Guides
Removing the upper oven rack, rack guides it easier to clean the upper oven. and burner cover will help make
a
I
REVERSE THE PROCEDURE TO REPLACE BURNERCOVER, RACK GUIDES ,* AND RACK.
