BLAUPUNKT SEATTLE RDM169
Instrukcja Obsługi

Quick Reference
3 Adjusting the volume Turn the knob to adjust the volume as desired. Menu level 1 Station keys and memory levels Menu level 2 Adjusting the radio functions

The volume level selected will appear in the display. When the unit is switched on, it will automatically play at the pre-set volume (ON VOL). It is possible to adjust the ON VOL (refer to �DSC programming - ON VOL�). 4 Softkeys / Display Softkey = key with different functions The functions which appear in the display can be selected. Radio operation While listening to the radio you can press TU to switch between menu level 1 and menu level 2. The unit will return to menu level 1 automatically 8 seconds after the last key is pressed.

NEXT - FM Switches between the memory levels for FM I, FM II, FM T. NEXT - AM (MW, LW) Switches between the MW and LW wavebands. ST1 - ST6 On this memory level it is possible to store radio stations on the FM levels I, II and �T� on the keys marked ST1 to ST6. 6 stations each can be stored for the MW and LW wavebands. Storing a radio station - Press one of the station keys from ST1 to ST6 until it is possible to hear the program again (beep). Recalling a radio station - Select the desired waveband. For FM press NEXT to select the memory level required and press the corresponding station key briefly.

NEXT - FM Switches between the memory levels for FM I, FM II, FM T. NEXT - AM (MW, LW) Switches between the MW and LW wavebands. BND Selects the waveband and memory level (FM I, FM II, FM T, MW, LW). SCA - Scan a) PTY is switched off (lettering is lit normally, not highlighted in the display) Press SCA briefly (Radio Scan) �SCAN� will flash in the display alternately with the abbreviation for the station being scanned. All of the radio stations within reception range will be scanned.

42