Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 14 (kliknij aby zobaczyć)
Using the system components
Switching the transmitter on
Take the stethoset receiver out of the transmitter�s charging compartment . The transmitter automatically switches on. The LED µ lights up green. Note: If the receiver is placed into the transmitter�s charging compartment , the transmitter automatically switches off. The LED µ goes off.
Switching the stehoset receiver on
Attention! Volume up? - No! When people use headphones, they tend to choose a higher volume than with loudspeakers. Listening at high volume levels for long periods can lead to permanent hearing defects. Please protect your hearing, Sennheiser headphones also sound exceptionally good at low volumes. Turn the volume control it clicks. in the direction of the arrow until
Before putting the receiver on, use the volume control to adjust the volume to a low level. This protects your hearing from damage.
³
Put the receiver on the correct way round, with the Sennheiser logo at the front.
Adjusting the volume
If the transmitter is connected to a headphones socket of your sound source: Adjust the volume of the sound source to a medium level. This improves the quality of cordless sound transmission. Use the volume control to adjust the volume to a sufficient and comfortable level.
