CASIO SHN4004D-6C
Instrukcja Obsługi

USER�S GUIDE ANALOG (HK-K)
Module No. 705, 707, 708, 709, 1330, 1331, 1332, 1333, 1342, 1344, 1345, 1346, 1347, 1360, 1362, 1398, 1399, 1747, 1770, 1771, 1782, 1787, 2717, 2718, 2719, 2725, 2731
[Module 1362, 1398, 1770] � Avoid setting the day-date between 8:00 p.m. and 1:00 a.m. (the day-date display may not change in the following day). � For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated.

To Set Time
Pull the crown out. Set the hands by turning the crown in either direction. Push the crown in on a time signal.
Crown
1 0

4

Elapsed time bezel

[Module 705, 1330, 1344, 1360, 1399, 1747, 1771]

[Module 1782]

� � �

To Set Time
1) Pull the crown out when the second hand is at 12 o'clock position and the second hand stops. 2) Set the hands by turning the crown. 3) In accordance with a time signal, push the crown in.
Crown

Some water resistant models are equipped with a screw lock crown. With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting.

[Module 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731]

Crown (Normal position) First click (Setting date)
30

To Set Time
1) Pull the crown out to the second click when the second hand is at 12 o'clock position and the second hand stops. 2) Set the hands by turning the crown. 3) In accordance with a time signal, push the crown in.

To Set Date
1) Pull the crown out to the first click. 2) Set the date by turning the crown. 3) Push the crown in to the normal position.

Second click (Setting time)

The configuration of your watch may differ somewhat from that shown in the illustration.

To Set Time
1) Pull the crown out to the second click when the second hand is at the 12 o'clock position and the second hand stops. 2) Turn the hands clockwise and put the watch four or five minutes forward. Then back them out. 3) Push the crown in to the normal position on a time signal.

First click (Setting day-date)
SUN 30

5 0

[Module 709, 1333, 1347]

Crown (Normal position)

Second click (Setting time)

1) Pull the crown out to the first click. 2) Set the date by turning the crown counterclockwise. Set the day by turning the crown clockwise. Check whether the day is English or Spanish. 3) Push the crown in to the normal position.

To Set Day-date

[Day display] English SUN MON TUE WED THU FRI SAT Spanish DOM LUN MAR MIER JUEV VIER SAB

30

2

1