|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
 ;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
PC-UM10M
8. SHORT BATTERY LIFE
First of all, explain that the battery life varies depending on the use environment and the operating conditions. 1) According to �BATTERY VOLTAGE ADJUSTMENT PROCEDURE� on the Service Manual, check the set values. (If necessary, make setting again. 2) Execute �CURRENT COMSUMPTION CHECK� on the Service Manual to check the current value. 3) Replace the battery pack.
9. THE CF CARD (SD CARD) IS NOT RECOGNIZED. / WHEN THE CF CARD IS INSERTED, NO OPERATION IS PERFORMED
First of all, check for deformation of the connector terminal of each card. 1) Check CF CD and SD CD on the right lower side of the diag menu. All should be "H." 2) Insert the CF card and the SD card, and check again. All should be "L."
NG(Remains at "H")
The card is not recognized. When the CF card : Check "CD" pin of the connector and is not recognized check CCD** of BR403 and IC401. When the SD card : Check soldering of the terminals outside is not recognized of the connector of CN1002 of the sub PWB. Check IC901 and BR906. TOP This terminal
3) When the CF card is inserted, no operation is performed.
Check with the OS. When the "WAIT" signal of the card is at "LOW", no operation is performed. (Wait is applied to the operation.) Check IC401 and BR402. (Check that soldering is properly made and that the resistors are not broken.)
SL-5500 TROUBLE SHOOTING
� 62 �
|
|
|
> |
|
