PANASONIC SLSX391C
Instrukcja Obsługi

Other Play Methods
The letters such as B in the various illustrations refer to the descriptions in the �Location of Controls� section (see page 2).

Skip play
The disc plays from the specified track through to the end, then play stops automatically. Preparation: Put unit in stop mode.

Program play
Up to 24 tracks can be entered in the programmed sequence. Preparation: Put unit in stop mode.

Repeat play/Random play
Press during play or stop mode.

MODE

1

Select the desired track.

1

Select the desired track.

F
The setting is switched in the sequence indicated below each time [MODE] is pressed.

B

B

1-track repeat (1 `)( ----------------]

2
H

2

Register in sequence.
(The indication �M� and the programmed sequence appear on the display.)

One track is repeated. v

| |

All-track repeat (`) Random (RANDOM)
The tracks play once each in random order and then play stops.
v

| |
| | | | |

All the tracks on the disc are repeated. | v |

MEMORY/RECALL

G Changing the sound quality
Press during play or stop mode.

3 4

Repeat steps 1 and 2 to program all the desired tracks.

Random repeat (RANDOM `) | The tracks play repeatedly in random |
order.
v

EQ

D H

When pressed during program play
The setting is switched in the sequence indicated below each time [MODE] is pressed.

Cancel (no indicator is shown) --------------}

1-track repeat (1 ` M)(------------]
The setting switches in the sequence indicated below each time [EQ] is pressed. S-XBS>TRAIN>Cancel (no indicator is shown) One track is repeated. v | |

� To program the same track in the sequence more than once
� After step 2, press [MEMORY/RECALL] desired number of times.

Memory repeat (` M)

|

^==========b S-XBS:
Select this setting to boost the low-range response.

The programmed tracks are repeated. | | v Cancel (M) -------------------------------------------}

� If �'� is displayed
� No more tracks can be programmed.

Note!
�You can select the first track to play in random play and random repeat play by pressing [9] while the disc is stopped. All the tracks are played. �You cannot select random play or random repeat play during program play. �The resume function does not work when random or random repeat are on. �The mode is canceled when you disconnect the power source.

� To confirm the contents of the program TRAIN:
Select this setting to avoid annoying other passengers with noise from your headphones/earphones while riding on the train, or to reduce fatigue when listening for a long period of time. � Press [MEMORY/RECALL] while the disc is playing. (The numbers of the programmed tracks appear on the display in sequence.)

� To delete the entire programmed sequence
� Press [�].

Note!
The setting returns to S-XBS when you disconnect the power source.

Note!
The repeat and random play modes are canceled after steps 1 and 2.

Anti-Skip System
This system deals with skipping in a variety of ways:
�An anti-skip mechanism prevents skipping caused when play speed changes due to swinging of the unit. �A recovery system immediately returns the laser pickup to its original position if it is knocked off the track by a strong shock. �An anti skip memory (max. 48seconds) fills in interruptions caused by bumps and vibrations. The anti-skip system works automatically while the system is on and cannot be canceled.

When bumps continue repeatedly
The elapsed playing time disappears and sound is interrupted.
S-XBS TRAIN RANDOM 1 M C VOL

Note!
�While the system is on, the disc rotates at a higher rate than usual in collecting extra audio data. This could result in a slight increase in disc rotation noise. �The anti-skip memory compresses digital signals.

E

4