ROLAND SPD-S
Instrukcja Obsługi

Quick Start

6

Press [START/STOP] to start sampling.
Do not power the SPD-S off while sampling is in progress.

A �Wait..� message appears and the SPD-S enters the standby state. Start playback of the CD player, then sampling begins automatically. A �Rec� message is displayed while sampling is in progress.

7 8

Press [START/STOP] to finish sampling.

A �write?� message is displayed. Assign a name to the wave. Press the PAGE buttons to move the cursor under the name and press [-]/[+] to change the character at the cursor position. When the name is complete, press [ENTER] to save it. A �now writing..� message appears; it shows that a wave is being saved.

If you press [START/STOP] or hit a relevant playing surface, you can check the sampled sound.

Do not power the SPD-S off while saving a wave.

If you do not want to save the wave, press [EXIT], and you will return to the �Stby� (Standby) screen in Step 5.

9

After saving the wave, you will return to patch mode. If you hit the playing surface of PAD 4, you can check the sampled sound.

10 Turn off the power to the SPD-S according to the steps of �Turning Off
the Power after the Shutdown Operation� (p. 22).

27

Setup Guide