How to Clean
= Be sure to unplug and carry out these operations when the unit is cooled down. = DO NOT use objects such as benzine, thinner, cleansing powder or metal scrubbers.
Steam Cap
< How to remove and clean 1. Pull off the steam cap to remove as shown in the figure. 2. Remove the valve holder from right to left. Wash and wipe with a damp cloth.
Body / Outer Lid / Upper Frame
Wipe with a damp cloth. = DO NOT use a dishwashing detergent.
Rubber DO NOT remove.
Pan
Wash with a dishwashing detergent and sponge and wipe off any moisture outside.
3. Wipe the inside of the hole with a damp cloth.
Wipe inside with a damp cloth.
Dew Collector
Remove and clean after every use.
Please do not remove steam cap when using rice cooker. < How to fit steam cap. 1. Insert the valve holder into the steam cap by setting the tap of the holder A into the slot of the cap B and turn it from left to right until it seats properly.
Pan Sensor
If an object has become stuck to the sensor, lightly polish it off using fine sandpaper ( of about # 600 ) / steel wool. Then wipe with a damp cloth.
Accessories
< How to fit steam dome (In case it is accidentally taken off) Place steam dome into its holder by inserting steam dome tap C into slot D (Steam dome mark 1 and steam cap mark 2 must be in the same line) then press steam dome into steam cap until it seats properly.
2. Put the steam cap into the hole of the lid.
Measuring Cup
Rice Scoop
Steaming Basket
(You will hear the sound � Click �) 2. Put the steam cap into the hole of outer lid.
