Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 5 (kliknij aby zobaczyć)
OPERATION
Starting playback
1Switch the power dial to turn on. The speed button and the strobe-illuminator light up. 2Turn on the amplifier�s power. Then, select the function switch. 3Set a record on the platter. To play 45 rpm records, use the included adaptor. 4Set the speed button�s according to the record�s playing speed. 5Press the START/STOP button. 6Hold the head shell�s finger support, and move the tone arm to the desired position over the record. 7Lower the tone arm gently until the stylus is on the record and playback begins. 8Adjust the speed of rotation.
When pitch is on, the speed of the platter can be adjusted in a range of +/-8%,+/-16%,+/-25% by the pitch slider. The speed is lower than the displayed speed when the strobe is flowing to the right, higher than the displayed speed when the strobe is flowing to the left. When the strobe is stopped, the platter is turning at the displayed speed. When the key adjust button is pressed during the pitch control mode, the button lights on, and musical key tone can be kept constant even the platter speed is changed with the slider.
Stopping or interruption playback
1Stopping or interruption playback. Raise the tone arm off the record. 2Hold the head shell�s finger support and move the tone arm back onto the arm rest. 3Secure the tone arm on the arm rest. 4Press the START/STOP button. The platter stops turning.
