jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 47 (kliknij aby zobaczyć)
Alignment and Adjustment
5-3 Electrical Adjustment
5-3-1 Head S/W Adjustment
Note : Only remote control ass�y can adjust. 2. When using the �TEST� button of remote control ass�y ; 1) Insert an SP tape into the housing ass�y. 2) Press the �PLAY� button. 3) Press the �TEST� button and �SPEED� button simultaneously. 4) This will adjust the head S/W point adjustment automatically. 5) After adjustment is completed, press the �POWER� button to release.
5-3-1 (a) IF REMOTE CONTROL ASS�Y (AC93-10039Y/69099-633-252) IS AVAILABLE
1. When using the �INPUT� button of remote control ass�y ; 1) Insert an SP tape into the housing ass�y. 2) Press the �PLAY� button. 3) Press the �INPUT� button and �3� button simultaneously. 4) This will adjust the head S/W point adjustment automatically. 5) After the adjustment is completed, press �POWER� button to release. 2. When using the �TEST� button of remote control ass�y ; 1) Insert an SP tape into the housing ass�y. 2) Press the �PLAY� button. 3) Press the �TEST� button and �SP/LP� button simultaneously. 4) This will adjust the head S/W point adjustment automatically. 5) After adjustment is completed, press the �POWER� button to release.
5-3-1 (b) IF NORMAL REMOTE CONTROL ASS�Y FOR X-7/X-8(DX7-R/DX7-RC/ DX8-R/DX8-RC) CHASSIS IS AVAILABLE
1. When using the �INPUT� button of remote control ass�y ; 1) Insert an SP tape into the housing ass�y. 2) Press the �PLAY� button. 3) Press the �INPUT� button and �3� button simultaneously. 4) This will adjust the head S/W point adjustment automatically. 5) After the adjustment is completed, press �POWER� button to release.
