DURABRAND T6609BK
Instrukcja Obsługi

T6609BK(EN).fm Page 10 Thursday, February 10, 2005 1:21 PM

Playback
Basic Playback Your unit can record on and play standard VHS cassettes. 1) Put a cassette into the cassette slot. The cassette is inserted automatically. The unit will turn on automatically. If the erase-prevention tab has been removed, the unit will start playback automatically. 2) Press PLAY B/K to begin playback. <If a tape is already in the unit...> �Just press PLAY B/K or B (PLAY) on the unit. Power will automatically turn on and playback will start. 3) To stop playback, press STOP C/L or C/A(STOP/EJECT) on the unit. 4) To eject the cassette, press C/A(STOP/EJECT) on the unit when the unit stops the playback. Tracking Adjustment � Tracking adjustment will be activated automatically (Digital Tracking function) when you start playback. � When playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking control manually by pressing PROG +/- until the streaks disappear. To return to the DTR function, stop the tape once and start playback again. Speed Search 1) Press g/B or h/s during playback to view a videotape at a high speed in either a forward or reverse direction. In this mode, the sound will be muted. 2) Press the button again, the unit will now search in super high speed. (This function will not operate for a cassette recorded in SP mode in the NTSC standard.) 3) Press PLAY B/K to return to normal playback. Still Picture 1) Press PAUSE during playback to view a still picture on the TV screen. 2) Press PLAY B/K to return to normal playback. � If you press PAUSE to freeze the picture, usually there will be noiselines on the TV screen. This is normal, however, each time you press PAUSE the lines will change position. � When the picture begins to vibrate vertically, stabilize the picture by pressing PROG +/- on the unit in the Still mode. � After the unit has been in Still mode for 5 minutes, it will stop automatically to protect the tape and the video head. <Note for �Speed Search� and �Still Picture�> � Usually there will be video �noise� lines (black and white streaks or dots) on the screen. This is normal. The still picture will, in addition to containing the �noise� lines, be black and white. This is not a fault of the machine but merely a by-product of the technology involved in producing a unit with LP mode. Fast Forward and Rewind 1) Press STOP C/L to stop the tape. 2) Press h/s or g/B. 3) Press STOP C/L to stop the tape.

10

EN