Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
Basic Controls
<Top Side Controls>
POWER TV/VIDEO VOLUME CHANNEL
TV/VIDEO button Volume Up/Down Channel Up/Down Main POWER switch First press the POWER switch to turn the set on. Operate your Remote control pointed to the Remote control sensor (Within about 6 meters in front of the TV set.) Power button Press to turn this set ON or OFF. (See page 13) Note: The LCD TV�s power cord must first be plugged into the wall outlet and then turned on at the Main POWER switch. Changes to the next channel up Moves cursor upward during menu mode. Reduces volume Increases volume Moves cursor to Moves cursor to the left during the right during menu mode. menu mode. TV/VIDEO button The input mode changes each time this button is pressed. Remote control sensor
MUTE button Press to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed. RETURN button Press to return to the previous screen. RECALL button Press to display channel, sleep timer and other options. SAP button Selects Audio mode (See page 21).
STEREO SAP MONO
Changes to the next channel down Moves cursor downward during menu mode. MENU button Press to display MENU screen, press again to clear. Direct program number Selection buttons R-TUNE button Switches to previously viewed channel or video mode. ASPECT button
4:3 16 : 9
MENU ADJUST
SET UP
SLEEP button The LCD TV may be preset to switch to stand-by after a fixed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (SLEEP timer cancelled) each time this button is pressed.
30 60 0 90
PICTURE PICTURE ADJUST AUDIO AUDIO ADJUST
When 3 minutes remain, � 3 � will flash. The SLEEP timer is cancelled if a power interruption occurs. Before the timer automatically turns the power off, the remaining time will blink on the screen (�3� for 3 minutes, �2� for 2 minutes and �1� for 1 minute before the power goes off).
