Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 20 (kliknij aby zobaczyć)
To replace:
1. Be sure the hinge arms are in the open position. Be careful if pulling the hinges open by hand. Hinges may snap back against the oven frame and could pinch fingers. 2. Hold the door at the sides near the top. Insert hinge arms into slots at the bottom of the door. Insert arms evenly, as far as they will go. 3. If the door is not in line with the oven frame, remove ii and repeat the above steps. 4. Replace the screws on the oven door.
Removing
the oven bottom
The panel in the oven bottom can be removed for cleaning.
Burn Hazard Make sure all parts are cool before removing. Failure to do so could result in burns.
To remove:
1. Remove oven racks. 2. Remove the two hold-down screws at the rear of the oven. If screws are too tight to remove by hand, use a screwdriver.
3. Place fingers in slots in bottom panel and lift rear of panel up and back until lip at the front of panel is clear of front frame of oven cavity. 4. Lift bottom up and out.
