Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 35 (kliknij aby zobaczyć)
From the remote control ONLY:
3
A-B REPEAT
Press ENTER.
PROGRAM MENU TITLE CHAPT 1 �� 2 �� �� �� �� ��
1
Press A�B REPEAT to select the start point.
�RPT A�� appears on the display and �REPEAT:A�� appears on the TV screen.
SELECT: ENTER
TITLE CHAPT 6 �� 7 �� 8 �� 9 �� 10 � � NEXT �� �� �� �� ��
ENTER
A-B REPEAT
3 �� 4 ��
2
Press A�B REPEAT again to select the end point.
�RPT A�� changes to �RPT A�B� and �REPEAT:A�� changes to �REPEAT:A�B,� then A�B repeat begins. The unit automatically locates point A and starts repeated playback between points A and B.
5 �� �� CHOOSE : 1�5 PREVIOUS
PLAY: 3
FINISH: PROGRAM
Title numbers you can select in the next step
To cancel A�B Repeat
Press A�B REPEAT again. �RPT OFF� appears on the display and �REPEAT OFF� appears on the TV screen.
Note:
A-B REPEAT
4
Press 3 or 2 to select a title number, then ENTER.
� 3 : Increases the number. � 2 : Decreases the number. � You can also select a title number using the number buttons.
ENTER
When the on-screen bar is shown on the TV screen, Repeat mode indication also changes as follows:
PROGRAM MENU T I T L E CHAPT 1 �2 �� 2 �� �� 3 �� �� 4 �� �� 5 �� �� CHOOSE : 1�9 PREVIOUS 6 7 8 9 10
SELECT: ENTER
T I T L E CHAPT �� �� �� �� �� NEXT �� �� �� �� ��
On some DVDs, A�B Repeat may not be used even within the same title. This is due to their disc structures, and not a malfunction of the unit.
PLAY: 3
FINISH: PROGRAM
Chapter numbers you can select in the next step
5
Programming the Playing Order of the Chapters�Program Play
You can arrange the chapter playback order before you start playing. You can program up to 20 steps. � Before making a program, make sure that the TV is turned on and the correct input is selected on the TV. From the remote control ONLY:
Press 3 or 2 to select a chapter number, then ENTER.
� 3 : Increases the number. � 2 : Decreases the number. � You can also select a chapter number using the number buttons.
PROGRAM MENU T I T L E CHAPT 1 2 3 4 5 2 �� �� �� �� 8 �� �� �� �� 6 7 8 9 10
SELECT: ENTER
T I T L E CHAPT �� �� �� �� �� NEXT �� �� �� �� ��
1 2
Load a disc.
� If the current playing source is not the DVD player, press 3/8, then 7 before going to the next step.
PREVIOUS
PLAY: 3
FINISH: PROGRAM
Press PROGRAM.
The PROGRAM MENU screen appears on the TV screen. � �PROGRAM� appears on the display.
PROGRAM
� To select all chapters in the selected title as one program step, simply press ENTER without selecting any number. �ALL� appears on the chapter number position.
6
Repeat steps 3 to 5 to program other chapters you want.
� After 10 steps are programed, �NEXT «� is selected (highlighted). If you want to program more steps, press ENTER.
PROGRAM MENU T I T L E CHAPT 1 2 3 4 5 �� �� �� �� �� �� �� �� �� �� 6 7 8 9 10
SELECT: ENTER
T I T L E CHAPT �� �� �� �� �� NEXT �� �� �� �� ��
7
Press 3/8.
TUNER PRESET
PREVIOUS
PLAY: 3
FINISH: PROGRAM
The chapters are played in the order you have programed and the PROGRAM indicator lights up. After all the chapters you programed are played back, the PROGRAM MENU screen appears on the TV screen again. TO BE CONTINUED ON THE NEXT PAGE
