JVC TH-S55EU
Instrukcja Obsługi

Connections

Do not connect the power cord until all other connections have been made.

This page is for TH-S55

The satellite speakers are equipped with their speaker cords attached directly to their speaker unit instead of having speaker terminals on their cabinet. Before connecting the speaker cords; Twist and pull the insulation coat off and remove.

Speaker cord

� Connect the black cords to the black (r) terminals. � Connect the white cords to the (q) terminals referring to the table below:
Front speakers SP-THS55F
FRONT SPEAKERS (LEFT) FRONT SPEAKERS (RIGHT)
FROM XV-THC3 XV-THS55 XV-THS58 XV-THS66

White Red Green Blue Gray

CENTER SPEAKER SURROUND SPEAKERS (LEFT) SURROUND SPEAKERS (RIGHT)

4�

16�

Powered subwoofer SP-PWS55

Surround speakers SP-THS55S

Center speaker SP-THS55C

CAUTION
� When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated near the speaker terminals on the rear of the powered subwoofer. � DO NOT connect more than one speaker to one speaker terminal.

Precautions for daily use � When moving the speakers, do not pull the speaker cords; otherwise, the speakers may fall over, causing damage or injury. � Do not reproduce sounds at so high a volume that they are distorted; otherwise, the speakers may be damaged by internal heat buildup.

11