Instrukcja Serwisowa jest kompletna i czytelna. Dziękuję!
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
4)
To fix C-In line connector to ECR. Connect the C-In line cable and C-In line connector as shown below: [Connector on the end of C-In line]
Terminal cap
Red
Red
C-In line connector
C-In line cable
Black Wrap bent shield wire with Copper tape. Shield wire Terminater (100 ohms)
Black
Notes: 1. Use crimp tool for connecting terminal caps. 2. If crimp tool is not available, connect the wires with solder instead of terminal cap. After the soldering, insulate the wires with vinyl tape.
[Connector between ECRs]
Terminal cap Red Red C-In line connector
C-In line cable Black Wrap bent shield wire with Copper tape. Shield wire Black
Notes: 1. Use crimp tool for connecting terminal caps. 2. If crimp tool is not available, connect the wires with solder instead of terminal cap. After the soldering, insulate the wires with vinyl tape.
