HOW TO HANDLE BASIC OPERATIONS
BASIC OPERATION
1. Press the POWER switch to turn on the power.
POWER
ON OFF
STATUS indication (PAL or NTSC)
PAL
gON : Power turns ON. (Power indicator: lit) GOFF : Power turns OFF. (Power indicator: unlit)
VIDEO A
To AC outlet (120 V AC, 50 Hz/60 Hz)
16
For U.S.A. and Canada
IN
OUT VIDEO B
2. Press the INPUT SELECT buttons to choose input.
Select video/audio signals input to terminals on the rear panel. The selected button lights in green.
About the STATUS indication
A B
IN
OUT AUDIO A
IN
OUT
To AC outlet (230 V AC, 50 Hz/60 Hz) For Europe
INPUT
SELECT button
Terminals on the rear panel Video signal input VIDEO A terminal VIDEO B terminal Audio signal input AUDIO A terminal AUDIO B terminal � With the COLOR SYSTEM setting set to AUTO mode, when you turn on the power or select inputs, the color system indication appears for about 3 seconds on the screen while PAL or NTSC signals are being detected. It does not appear when receiving a
IN
OUT AUDIO B ASPECT REMOTE
16
INPUT
INPUT SELECT
1 Input A
(VIDEO) (VIDEO)
2 Input B
For the United Kingdom
3. Press the VOLUME/SELECT buttons to adjust the speaker volume.
Press this button to display the speaker volume level on the
page 9 for more information about STATUS indication setting.
00 ~ 50
15 AC inlet [AC IN]
Power input connector. Connect the provided AC power cord ^ to an AC outlet (120 V AC or 230 V AC, 50 Hz/60 Hz).
16 Power cord
Connects the provided power cord (120 V AC or 230 V AC, 50 Hz/60 Hz) to the AC IN connector %.
VOLUME/SELECT
Caution:
In North America (USA and Canada), this monitor comes with one power cable. In Europe and the United Kingdom, two power cables are provided (one for use in continental European countries and the other for the UK). Be sure to use the power cable that is appropriate for the AC outlets used in your region. If none of the power cables provided is suitable, please contact your dealer or qualified service personnel to obtain the correct type of power cable.
screen. + : The Built-in speaker volume is increased. (00 = 50) � : The Built-in speaker volume is decreased. (50 = 00) * Screen indication will disappear about 10 seconds after operating or immediately when you press the MENU button.
VOLUME : 20
�
+
PICTURE ADJUSTMENT
1. Press select buttons corresponding to the item you want to adjust.
�20 ~ +20
CHROMA CONTRAST
The item you select is displayed on the screen. 1 Phase control : Press the CHROMA/PHASE button
twice. : Press the CHROMA/PHASE button once. 3 Brightness control : Press the CONTRAST/BRIGHT button twice. 4 Contrast control : Press the CONTRAST/BRIGHT button once.
PHASE
BRIGHT
2 Chorma control
PHASE
:
00
2. Adjust with the VOLUME/SELECT buttons.
Items
VOLUME/SELECT
� Phase control is effective only in the NTSC color system mode. � Chroma control is not effective when receiving B/W or when no signal is input. � When CHROMA is adjusted to ��20,� the picture becomes less colorful. � �NO EFFECT� is displayed (for about 3 seconds) when your selected function has no effect.
* Screen indication will disappear about 10 seconds after operating or immediately when you press the MENU button.
6
7
ENGLISH
16
B/W signal or when no signal is input. Refer to page 8 for more information about COLOR SYSTEM setting and
