JVC TM-A101G/U
Instrukcja Obsługi

TM-A101G

CONTROLS AND FEATURES
REAR VIEW
<Rear Panel>
15

(cont�d)

HOW TO HANDLE BASIC OPERATIONS
BASIC OPERATION
1. Press the POWER switch to turn on the power.
POWER
ON OFF

STATUS indication (PAL or NTSC)
PAL

gON : Power turns ON. (Power indicator: lit) GOFF : Power turns OFF. (Power indicator: unlit)

VIDEO A

To AC outlet (120 V AC, 50 Hz/60 Hz)

16
For U.S.A. and Canada

IN

OUT VIDEO B

2. Press the INPUT SELECT buttons to choose input.
Select video/audio signals input to terminals on the rear panel. The selected button lights in green.
About the STATUS indication
A B

IN

OUT AUDIO A

IN

OUT

To AC outlet (230 V AC, 50 Hz/60 Hz) For Europe

INPUT
SELECT button

Terminals on the rear panel Video signal input VIDEO A terminal VIDEO B terminal Audio signal input AUDIO A terminal AUDIO B terminal � With the COLOR SYSTEM setting set to AUTO mode, when you turn on the power or select inputs, the color system indication appears for about 3 seconds on the screen while PAL or NTSC signals are being detected. It does not appear when receiving a

IN

OUT AUDIO B ASPECT REMOTE

16

INPUT

INPUT SELECT

1 Input A

(VIDEO) (VIDEO)

2 Input B

For the United Kingdom

3. Press the VOLUME/SELECT buttons to adjust the speaker volume.
Press this button to display the speaker volume level on the

page 9 for more information about STATUS indication setting.

00 ~ 50

15 AC inlet [AC IN]
Power input connector. Connect the provided AC power cord ^ to an AC outlet (120 V AC or 230 V AC, 50 Hz/60 Hz).

16 Power cord
Connects the provided power cord (120 V AC or 230 V AC, 50 Hz/60 Hz) to the AC IN connector %.

VOLUME/SELECT

Caution:
In North America (USA and Canada), this monitor comes with one power cable. In Europe and the United Kingdom, two power cables are provided (one for use in continental European countries and the other for the UK). Be sure to use the power cable that is appropriate for the AC outlets used in your region. If none of the power cables provided is suitable, please contact your dealer or qualified service personnel to obtain the correct type of power cable.

screen. + : The Built-in speaker volume is increased. (00 = 50) � : The Built-in speaker volume is decreased. (50 = 00) * Screen indication will disappear about 10 seconds after operating or immediately when you press the MENU button.
VOLUME : 20

�

+

PICTURE ADJUSTMENT
1. Press select buttons corresponding to the item you want to adjust.
�20 ~ +20
CHROMA CONTRAST

The item you select is displayed on the screen. 1 Phase control : Press the CHROMA/PHASE button
twice. : Press the CHROMA/PHASE button once. 3 Brightness control : Press the CONTRAST/BRIGHT button twice. 4 Contrast control : Press the CONTRAST/BRIGHT button once.

PHASE

BRIGHT

2 Chorma control

PHASE

:

00

2. Adjust with the VOLUME/SELECT buttons.
Items
VOLUME/SELECT

�
Notes:

+

VOLUME/SELECT button � + reddish lighter darker lower greenish deeper brighter higher

PHASE (Phase) CHROMA (Chroma) BRIGHT (Brightness) CONTRAST (Contrast)

� Phase control is effective only in the NTSC color system mode. � Chroma control is not effective when receiving B/W or when no signal is input. � When CHROMA is adjusted to ��20,� the picture becomes less colorful. � �NO EFFECT� is displayed (for about 3 seconds) when your selected function has no effect.

* Screen indication will disappear about 10 seconds after operating or immediately when you press the MENU button.

6

7

ENGLISH

16

B/W signal or when no signal is input. Refer to page 8 for more information about COLOR SYSTEM setting and

No.51921 1-4